News, Blog and Technical Articles - Page 3

Click here to view page 1 of News, Blog and Technical Articles

lapping safety valves By: Kemet 1st November 2016 Lapping

Lapping Safety Valves

Kemet Diamond Lapping machines are ideally suited for lapping and repairing safety valves...

cleaning Polypropylene Boxes By: Kemet 25th October 2016 Cleaning

Cleaning Polypropylene Boxes with an Ultrasonic Cleaner

Case study on cleaning polypropylene boxes

metallurgy catalogue By: Kemet 19th October 2016 Metallography

NEW Materialographic Catalogue

Hot off the press comes Kemet International’s new catalogue detailing our extensive range of Materialographic Equipment and Consumables.

polishing steel By: Kemet 12th October 2016 Lapping

Lapping & Polishing Steel

Case study on Lapping and Polishing Steel

lapping recessed surfaces By: Kemet 4th October 2016 Lapping

Lapping of Recessed Surfaces

These surfaces would normally require labour intensive hand lapping by a skilled operative, but the market...

cleaning coins By: Kemet 27th September 2016 Cleaning

Cleaning coins with an Ultrasonic Cleaner

Case study on cleaning coins

Medical Device Manufacturing By: Kemet 20th September 2016 Lapping

Medical Device Manufacturing

Medical Implants are currently in great demand with manufacturers being asked for ever higher standards of surface finish and profile accuracy...

polishing ceramic By: Kemet 14th September 2016 Lapping

Lapping & Polishing Ceramic

Case study on Lapping and Polishing Ceramic

petrographic thin section preparation By: Kemet 2nd September 2016 Petrography

Petrographic Thin Section Preparation

In optical mineralogy and petrography, a thin section is a laboratory preparation of a rock, mineral, soil, pottery, bones, even metal sample for use with...

cleaning keyboards By: Kemet 30th August 2016 Cleaning

Ultrasonic Cleaning Keyboards

Case study on cleaning keyboards with an ultrasonic cleaner

polishing graphite By: Kemet 23rd August 2016 Lapping

Lapping & Polishing Graphite

Case study on lapping, polishing and cleaning Graphite

thin section preparation By: Kemet 16th August 2016 Metallography

Thin Section Preparation

Our helpful guide on the initial stage of preparing thin sections - Abrasive Cutting

cleaning copper By: Kemet 10th August 2016 Cleaning

Ultrasonic Cleaning Copper, Silver & Brass

Case study on ultrasonic cleaning copper, silver & brass

polishing stainless steel By: Kemet 3rd August 2016 Lapping

Lapping & Polishing Stainless Steel

Case study on lapping and polishing stainless steel components.

metallography etching By: Kemet 26th July 2016 Metallography

Metallography Etching

Etching of the metal surface is done to make visible the crystalline structure of the metal and to produce optical contrast between the various constituents...

polishing cobalt By: Kemet 20th July 2016 Lapping

Polishing Cobalt

Case study on polishing cobalt to a mirror finish.

cleaning conditioning rings By: Kemet 12th July 2016 Cleaning

Ultrasonic Cleaning Conditioning Rings

How to clean conditioning rings quickly

polishing metallography specimens By: Kemet 5th July 2016 Metallography

Polishing Metallography Specimens

Each sample may require a different approach depending on the material, size, finish required and machinery available. In general, a metallographic sample is initially...

micrologue metallography By: Kemet 28th June 2016 Metallography

Metallography Microstructure & Analysis

Kemet Micrologue contains a number of case studies describing various sample preparation methods and the results obtained by applying these methods.

lapping titanium By: Kemet 21st June 2016 Lapping

Lapping Titanium

Case study on lapping and polishing titanium components.

Removing Aluminium Deposits By: Kemet 14th June 2016 Cleaning

Removing Aluminium Deposits, Staining & Burn Marks

Case study on ultrasonic cleaning to remove aluminium deposits, staining & burn marks.

cleaning Stainless Steel By: Kemet 8th June 2016 Cleaning

Cleaning Stainless Steel & Aluminium

Case study on ultrasonic cleaning stainless steel & aluminium.

die polishing coins By: Kemet 31st May 2016 Toolroom

Die Polishing Tips

Helpful tips & techniques for Die Polishing coins, Tungsten Carbide round, shaped wire, bar drawings...

polishing carbons and carbides By: Kemet 24th May 2016 Lapping

Kemet Develops New Diamond Slurry for Polishing Carbons and Carbides

Best process for polishing Carbon, Tungsten Carbide and Silicon Carbide...

cleaning carbs By: Kemet 17th May 2016 Cleaning

Ultrasonic Cleaning Carbs

Case study on ultrasonic cleaning carbs.

die ultrasonic cleaning By: Kemet 10th May 2016 Cleaning

Mould & Die Cleaning

Ultrasonic Die cleaning is based on a combination of chemical and mechanical cleaning to remove...

polishing medical implants By: Kemet 3rd May 2016 Lapping

Polishing Medical Implants

Kemet have spent many years developing, perfecting and automating Precision Surface Finishing Processes, specifically for the Medical Industry...

new match lapping machine By: Kemet 29th April 2016 Lapping

NEW Match Lapping Machine

The NEW Match Lapping Machine for convex and concave hydraulic pump barrels, swash plates & many other parts.

Cleaning Carburetor By: Kemet 25th April 2016 Cleaning

Cleaning Carburetor

Case study on the best way to clean a carburetor.