Cleaning of Aircraft & Jet Engines

Kemet are the UK representatives for PROCECO, offering a wide selection of automatic aqueous parts washers for degreasing, cleaning and remove debris from aircraft & Jet engines.

Turntable Washer for Aircraft Engine Parts

This turntable washer (Model HD 152) cleans; the center bodies of P&W series 4000 engines, or equivalent. Large diameter engine parts like air intakes, housings, combustion chambers, fan and turbine disks.

  • Environmentally friendly - no solvents. Bio-degradable commercial detergents only.
  • Re-circulating principle - water-based cleaning solutions conserve energy, detergent and water.
  • Power spray principle - produces high-quality and high-speed cleaning.
  • Low chemical cost - 3 to 7% detergent in water.
  • Low energy cost - spray cabinet and tanks fully insulated, programmable heating systems.
  • No health hazard to workers.
  • 4-stage cleaning process (Parts free of oil, grease, dust and dirt)
    • Alkali wash
    • Fresh water rinse
    • Recirculating rinse
    • Air blow-off
  • 3 applications in one machine
    • cleaning of center bodies vertically rotating in special fixture
    • cleaning of ring-shaped and cylindrical engine parts with robotic spray manifold
    • fan and turbine disks, blades and vanes
  • PLC controls allow for multiple cleaning programs and quick diagnostics
  • Zero-discharge process (No effluent to sewers – no environmental impact)
  • Re-circulating principle (Conservation of water, energy and detergent)
  • Thermal insulation of machine and 7-day heating program (Energy conservation)

Turntable Washer for Aircraft Engine Parts

cleaner for Aircraft Engine Parts

Turntable Washer to clean Jet Engine Parts

  • Model HD 62
  • For cleaning prior to inspection of GE, P&W, RR jet engine parts
  • 3-stage process
    • Degreased and clean parts
    • Recirculated alkali wash
    • Non-recirculated fresh water rinse
    • Recirculated rinse
  • Oscillating center nozzle pipe sprays the insides of cylindrical parts
  • Zero-discharge process (No effluent to sewers – no environmental impact)
  • Re-circulating principle. (Conservation of water, energy and detergent
  • Thermal insulation of machine and 7-day heating program

washer for large engines

cleaning aircraft jet engines

Washer with Auto-Loader for Aircraft Engine Parts

For cleaning and removing buffing compounds from Nickel alloy and titanium engine parts. Parts dry via compressed air blow-off, parts will air dry within minutes.

  • 3-stage process
    • Alkali wash
    • Fresh water rinse
    • Air blow-off
  • Automatic loading system eliminates continuous operator attendance
  • Two-level turntable. increases production capacity
  • Special spray manifold optimises spray exposure of parts
  • Automatic extraction of sludge and chips from wash tank – extends tank life
  • Zero-discharge process (No effluent to sewers – no environmental impact)
  • Re-circulating principle (Conservation of water, energy and detergent)
  • Thermal insulation of machine and 7-day heating program

washer for aircraft engine parts

Model HD 152 HD 62 FTT 62
Turntable diameter 3.8m 1.6m 1.6m
Height 2.7m 1.2m 1.5m
Turntable load capacity 2,250 kg 900 kg 1,100 kg
Wash tank volume 3,850 litres 2,100 litres 2,300 litres
Connected power 460V - 3PH - 60Hz - 130A / 380V - 3PH - 50Hz - 160A 600V - 3PH - 60Hz - 90A / 380V - 3PH - 50Hz - 140A 230V - 3PH - 60Hz - 200A / 380V - 3PH - 50Hz - 120A
Floor space requirement 18’ W × 39’ L / 5,5 m W × 12.0 m L 9’ W × 16’ L / 2,7 m W × 4,8 m L 10’ W × 17’ L / 3,0 m W × 5,0 m L